The new standard of the most popular printing mach

2022-08-02
  • Detail

The first printing press new standard was issued and the standard system was just improved at the beginning. The standard gb/t sheet fed lithography press formulated by the National Printing Machinery Standardization Technical Committee was officially released and implemented on january1,2006 after ups and downs. This standard is the key standard for printing machinery products, and also the basis for reflecting the technical level of the whole printing machinery products. In the revision of this standard, some technical, performance and quality indicators of printing machinery have been improved, and the requirements of safety standards have been added

After China's entry into the world trade organization, printing machinery, like other mechanical and electrical products, is also facing the impact of foreign brands. According to statistics, at present, domestic printing equipment only accounts for 30%~40% of the domestic market. To expand the domestic market share and improve the competitiveness of products in the domestic market, we must improve the technical level of products. To expand product exports, we must also improve the technical level and safety performance of our products, and at least reach the international average level. However, there is still a big gap in the technical level and quality of domestic printing machinery compared with foreign countries

from the perspective of the printing industry, due to the large gap between the economic development level of the East and the west, the demand for high, medium and low-grade printing equipment is also different. Therefore, it is understandable to be at the medium-grade level when formulating the standards for printing machinery. However, with the rapid development of economy and the accumulation of capital in the printing industry, users' requirements for printing machinery are also increasing. The standard level should gradually reach the international standard

in terms of printing machines, from the earliest OIS sheet fed printing machines to small offset printing machines and sheet fed monochrome printing machines; From low-grade paper cutting machine to tiger mouth die-cutting machine, it has experienced the process from hot to the gradual depression of the market. With the continuous improvement of the economic level, people have higher and higher requirements for the printing quality of printed matter. How to improve the technical level of printing machinery, the key is to continuously improve the standardization level and guide the healthy development of the printing machinery industry

domestic printing machines made breakthroughs

in May this year, at the CHINApRINT2005 exhibition held in Beijing, China's printing machinery technology has been greatly improved by about 300 people per square meter. The full series of sheet fed printing machines, including multi-color printing machines, have launched a series of products to meet the needs of the packaging and printing industry for large format printing equipment. The printing speed of the multi-color folio printing machine has reached 15000 sheets per hour; Four open and eight open sheet fed multi-color printing machines have been mass produced to meet the needs of the domestic market

the printing speed of web printing machine (except for large double width Press) has reached 70000-75000 sheets per hour; The printing speed of commercial and semi commercial printing machines reaches 45000 sheets per hour; The printing speed of the small tower press can reach 45000 sheets per hour. There are a wide range of web presses suitable for all kinds of paper, and there is a large export volume

the technological level of web gravure printing machine has also been greatly improved, and the printing speed has reached 300m/s. The number of flexographic printing machine manufacturing enterprises is growing, and the size of the equipment is also developing from 420mm to 620mm. The main supporting parts of the equipment, such as wrinkle roller and round die cutting roller, have been localized, and the field of flexible printing is also developing

post press binding equipment is developing very fast. Not only are more and more enterprises entering this field, but also some large enterprises are developing to post press and related similar equipment fields. Horse riding binding production line, wireless binding production line, automatic box gluing machine, automatic carton production line, automatic flat pressing die-cutting machine and other efficient equipment have been able to meet the needs of the domestic market. According to statistics, the speed of horse riding binding production line can reach 11000 copies per hour, the speed of wireless binding production line can reach 5500 copies per hour, and the full-automatic flat pressing die-cutting machine has reached 8000 pieces per hour. In addition, the automatic shell making machine, semi-automatic box making machine, stacking baler, high-speed folding machine and other equipment have reached a high level

after the reform and opening up, in addition to the enterprises designated by the state to produce printing machinery, a number of private enterprises rose rapidly and began to enter the market. In order to improve the technical level and quality of equipment, the state has realized the importance and urgency of adopting international standards. The introduction of the standard gb/t sheet fed lithography press will drive the medium and low-grade printing machinery to improve the product technology level, guide enterprises to take the road of internationalization, and gradually form a pattern of coexistence of international standards, domestic advanced standards and domestic general standards

At present, China's printing machinery market has entered a new development period of the "Eleventh Five Year Plan". The macro-control policies formulated by the state are having a positive impact on the printing machinery. The State Customs is also making heavy efforts to deal with the cases of tax fraud in importing printing machinery, which is really good news for the printing machinery manufacturing enterprises. It is reported that the right to interpret standardization plays an important role in dealing with enterprises that import printing machinery by cheating tax

now, there is a popular saying in the market: when the quality is at a disadvantage, it depends on price competition, and when the price is at a disadvantage, it depends on service competition. However, the standardized market ultimately depends on technology and quality competition

it is reported that the National Technical Committee for standardization of printing machinery is declaring product standards that are large in quantity and wide in scope and involve national economic security and environmental protection as national standards. On the one hand, it reflects the state's attention to the printing machinery industry; On the other hand, the reputation of printing machinery standards is enhanced, and the standard area of enterprises is continuously expanded, so as to drive the improvement of product quality and technical level of the whole industry

it is understood that the two international safety standards for printing machines and post press binding equipment will be completed from 2006 to 2007. The standard gb/t sheet fed lithographic press will also continue to be revised during this period

imperfect printing machine standard system

although various new standards in the printing equipment industry will be issued one after another, they still cannot meet the requirements of technological progress of new products. The problems existing in the standardization of printing machinery in China are as follows: first, the standardization lags behind the development of product technology, affecting the improvement of enterprise product level; Second, the standardization work can not drive a large number of exports of printing machinery, and can not establish technical barriers for the import of foreign products. Second, the use of electronic tensile testing machines; Third, the standardization work can not promote the elimination as soon as possible of the standard products of the electronic universal experimental machines that are basically the conventional experimental machines with a capacity of less than 1 ton; Fourth, the standardization work can not expand the market sales of high-tech products; Fifth, there are no safety and environmental protection standards in the standard system. (the author is a member of the technical committee of China printing and equipment industry association and a consultant of the National Printing Machinery Standardization Technical Committee.

information source:

Copyright © 2011 JIN SHI